New Era Unobat | Sports Flooring

The New Era UnoBat sports floor system is a packable high quality flooring system which can be installed over an uneven sub‑floor. This system incorporates a black evazote polyethelene foam rubber base for higher performance characteristics to the higher A4 level of the standard.

The sports floor system comprises the 22 mm Junckers solid hardwood board, secretly nailed to a kiln dried softwood batten, which is supported by foam backed strong polypropylene cradles. Fine levelling of the system takes place between the cradles and the battens. There are a range of heights available from 60 mm to 439 mm. Choice of batten centres depends on requirements as to sports performance and loading capacity.

Looking for specs and documentation? Download our specs below

SPECS AND DOCUMENTATION

Facts

PERFORMANCE

Area-elastic according to EN 14904 class A4

USE

All types of sport
Multi-functional sports halls
From small leisure centres to large arenas
Refurbishment

FLOORBOARD TYPE

Prefinished 22 mm 2-strip solid hardwood floor

SUBCONSTRUCTION

Single layer batten system

BATTEN CENTRE, C/C

411,1 mm

REQUIRED SUBFLOOR

Flat or uneven

CONSTRUCTION HEIGHT

60 mm - 439 mm

JUNCKERS 25 YEARS FATIGUE TEST

SANDING AND RE-SEALING

Yes to bare wood 8-10 times

SUITABLE FOR UNDERFLOOR HEATING

Yes

SYSTEM COMPONENTS

Minimum construction height, including 22 mm thick floorboard - 74 mm

1. 22 x 129 x 3700 mm floorboards
2. New Era batten system: 22, 36, 48 or 63 mm x 45 mm battens
3. Polyproplylene cradles with 10 mm foam
4. Polythene vapour check
5. Skirtings

 

 

 

REQUIREMENTS EN 14904:A4

TEST RESULTS

SHOCK ABSORPTION

≥ 55 < 75 %

65 %

VERTICAL DEFORMATION

≥ 2.3 < 5.0 mm

2.8 mm

BALL BOUNCE

≥ 90 %

91 %

FRICTION

≥ 80 ≤ 110

~ 85

ROLLING LOAD

≥ 1500 N

3000 N1

POINT LOAD

None

4500 N ~ 450 kgs2

1. Junckers test with solid rubber wheels: width 50 mm, diameter 100 mm. 
2. Junckers test with 100x100 mm point load.

CHOICE OF FLOORBOARD

A Junckers sports floor is made from 100% solid hardwood and will last for generations. Each floor board is made from two rows of staves and is tongue and groove jointed all round. 

The floors are extremely stable and therefore cause no challenges when humidity levels change through the year. We take far longer than normal over the drying process to ensure that the movements that occur naturally in all wood is fully controlled and kept to a minimum. Our Beech sports floors are dried using Junckers unique press drying method. Our ash and maple sports floors are kiln dried.

Our floors are ready to use as soon as they are fitted. This is because Junckers floors are sealed in the factory with our own produced hard wearing polyurethane lacquer. 

All Junckers solid hardwood sports floors have the Danish Indoor Climate Certificate for low emissions of organic substances and can be delivered with either a FSC® or PEFC™ accreditation. 

We guarantee fast and easy installation. Each floor board has a length of 3700 mm and covers approx. 0.5 m².

keyboard_arrow_up



picture_as_pdf